Description:
Mi-Wave’s 535 Series waveguide switches consists of a waveguide switch selection similar to the 530 switch and a rotary motor encased in a machined housing. These switches are used in application that require remote-controlled or timed transmission line switching. They are particularly useful in operational systems and test setups where they supply variety of switching combinations.
Other frequencies available from 8.2–220 GHz
Features
• Low VSWR
• Low Insertion Loss
• Faraday Rotation Devices
• Low Cross-polarization components
Applications
• SatComm
• Test & Measurement Labs
• RF Communication
*All data presented is collected from a sample lot.
* Actual data may vary unit to unit, slightly.
*All testing was performed under +25 °C case temperature.
*Consult factory to confirm if material, plating, size, shape, orientation and any electrical parameter is critical for the application as website information is for reference only.
*Millimeter Wave Products, Inc. reserves the right to change the information presented on website without notice as we continue to enhance the performance and design of our products.
Electro-Mechanical RF Waveguide Switch Operation
(1) DURING INITIAL POWER UP OR AT A POWER FAILURE ALWAYS HAVE THE EXTERNAL TTL CONTROL LOW (0 V) OR DISCONNECTED .
(2) SWITCH WILL POWER UP IN POSITION -1 AND IN EXTERNAL CONTROL MODE .
(3) TO SELECT SWITCH POSITION MANUALLY, PRESS MANUAL OPERATION BUTTON ON TOP OF HOUSING ONCE, SWITCH WILL MOVE TO POSITION -2 AND SWITCH WILL GLOW BLUE .
(4) TO SELECT POSITION -1 PRESS MANUAL OPERATION BUTTON AGAIN AND SWITCH WILL MOVE TO POSITION -1 AND BE IN EXTERNAL TTL CONTROL MODE
(5) TO USE SWITCH IN EXTERNAL TTL CONTROL, SWITCH MANUAL OPERATION BUTTON MUST BE SELECTED FOR POSITION -1 AND BLUE LIGHT OFF
