714 Series | Inside Standard Panel Mounts Each of Mi-Wave’s 714 Series Outside Standard Panel Mounts is used for pannel feed-thru within the system. Consult MiWave for further details. These are connected from inside of the box. Features Full Waveguide Bandwidths Waveguide Feed-thru for Panel Mount Applications OUTLINES: Ka-Band Q-Band U-Band V-Band E-Band W-Band
713 Series | Outside Standard Panel Mounts Each of Mi-Wave’s 713 Series Outside Standard Panel Mounts is used for pannel feed-thru within the system. Consult Mi-Wave for further details. These are connected from outside the box. Features Full Waveguide Bandwidths Waveguide Feed-thru for Panel Mount Applications OUTLINES: Ka-Band Q-Band (V-E-W-F-D-G-H-J) Band Frequently Asked Questions for Waveguide to Coax Adapter. coming
712 Series | Waveguide Bulkhead Adapters Each of Mi-Wave’s 712 Series Waveguide Bulkhead adapters was developed for panel feed-thru use in systems. These 712 adapters operate over the full waveguide bands from 8.2 to 325 GHz. O--rings are provided on the panel mount for moisture resistance and a wide variety of flange types and configurations. Units come with a body, two nuts, and two O-rings. Standard lengths are 1.00 inches with custom lengths available upon request. Consult
Products> Antenna Products > Standard Gain Horns > 261(2.8)-25/387 Standard Gain Horns WR-2.8 Standard Gain Horn Antennas 200GHZ to 400GHz, Gain 25 dBi, Polarization Linear, VSWR 1.15:1 Description: Mi-Wave's WR-2.8 Gain Horn Antennas operate in the 260GHZ to 400GHz spectrum and are created with the end consumer in mind. We know you need and demand the absolute best when it comes to wr-2.8 horn antennas and look to provide you with the best solutions possible. Some
Harmonics, Distortion and Power Measurement Published by: Mi-Wave© (Millimeter Wave Products Inc.) Authored by: Lokesh Saggam, Shashi Saggam Abstract----Harmonics are unwanted frequencies generated by system nonlinearities. They are multiples of the fundamental test frequency. RF power amplifiers are responsible for most of the unwanted harmonics. This paper discusses about harmonic distortion and power measurement of W-band X6 Multiplier with 15 dBm Output Power. Two methods of Harmonics measurement are compared, and their accuracy is discussed here.
Power Measurement Errors Published by: Mi-Wave© (Millimeter Wave Products Inc.) Authored by: Lokesh Saggam, Shashi Saggam Introduction Power level is frequently the critical factor in the design, evaluation, purchase and ultimately, the performance of almost all RF products and equipment. When a customer purchases a product with specified power performance for a negotiated price, the final production-line test results must agree with the customer’s incoming inspection data. The receiving, installing, or commissioning phases often occur at
28 GHz Bidirectional 0 to 62 dB Voltage Controlled Variable Digital Attenuator for 5G Application Abstract Digitally controlled attenuators are the key components in communication, radar, instrumentation, and automatic test systems. Broad bandwidth, high dynamic attenuation range, low insertion loss, high control resolution and fast control speed are key considerations in nearly all applications. This paper shows the implementation, features, operation, and 5 G application of Bidirectional voltage variable digital attenuator with 0-62 dB attenuation range and
Products> Antenna Products > Trihedral Corner Reflector Antennas Trihedral Corner Reflector Antennas 8.4 to 260Ghz, Standard sizes from 1 to 8 inch configurations Description: Mi-Wave’s 770 Trihedral corner reflector antennas consist of a circular scalar feed horn illuminating a piano-convex lens. The trihedral corner reflector antennas simulate radar targets precisely and are widely used for Radar system calibration. We know you need and demand the absolute best when it comes to trihedral antennas and
Products> Antenna Products > Prime Focus Antennas 8.2 - 110 GHz, Prime Focus Antennas Diameters from 3 to 48 inches Description: Mi-Wave’s 202 Series antenna consists of a parabolic reflector, a linearly-polarized primary feed, and a feed support assembly attached to the reflector's rim to position the feed accurately. Tapped holes are provided on each antenna for mounting. Note: Our website contains just a few types of Antennas we build. Consult with us for your
If you didn't find what you were looking for, try a new search!
